The Smartkote Range

Protectakote

A single component textured polyurethane coating which is durable, flexible and provides chemical resistance. Protectakote chemically bonds to most surfaces delivering a tough anti-slip finish.

Protectakote UVR

An aliphatic, single pack polyurethane coating giving a colourfast and abrasion resistant coating able to withstand UV exposure, extreme exterior conditions and affords greater durability when exposed to corrosive chemicals.

Safekote

Safekote is an aliphatic, single pack polyurethane coating which gives a colourfast and abrasion resistant coating able to withstand UV exposure as well as extreme exterior conditions. It has an easy to clean finish due to the silicone particles mixed in the product.

Marinekote

The anti-slip granules in Marinekote and Safekote are silicon spheres but the larger rubber granules in Protectakote. This smaller sized particle gives an equivalent anti-slip finish and UV stability as Protectakote UVR but is easier to clean and maintain.

Protectakote WB

Protectakote Water Based is an alternative polyurethane coating which is a single pack, solvent-free, water-based paint. It cures into a tough, textured anti-slip film with equivalent abrasion, chemical and weather resistance as our solvent based standard Protectakote. It has the real benefits of a water based material – easier to transport, easier to store, less regulations on application and less harmful.

Accelerator

Protectakote Accelerator is a pure, solvent free catalyst used to speed up the drying time of all Smartkote non-slip and smooth coatings. It should only be added where time constraints exist and temperatures are lower than 15°c.

UVR Accelerator

Protectakote UVR Accelerator is a pure, solvent free catalyst used to speed up the drying time of all Smartkote UVR non-slip and smooth coatings. It should only be added where time constraints exist and temperatures are lower than 15°c.

Protectakote 2K Metal Primer

A two pack etch primer suitable for use to aid adhesion of Smartkote topcoats to all types of aluminium, stainless and galvanized steel.

Protectakote Clear Primer Treatment

A single component primer treatment, which can be used to prepare inorganic surfaces such as marble, glazed ceramic tiles and aluminium prior to the application of Smartkote topcoats. Ideal when a clear primer is needed.

EP90 Universal Epoxy Primer

EP90 is an easy to use two pack Epoxy Primer suitable for all polyurethane topcoats. Ideal for concrete, plaster, metals, wood, stone and existing coatings; it has minimal solvent content and low odour suitable for indoor spaces. It is fast drying even in low temperatures.

Duram Duraprime

A dual component, water-based epoxy primer for damp and bituminous surfaces.

NS1 Rust Buster

Stops rust in its tracks! It will react with rust by neutralizing the iron oxide that causes rust, converting it into a stable, solid compound that is ready for further priming and painting.

Xylene Solvent/Thinners

A water and alcohol free low viscosity solvent suitable for uses as thinners and a cleaner for polyurethane products.
DO NOT USE ANY OTHER SOLVENT WITH PROTECTA-KOTE.

4ins Roller Set

The textured rollers give a good even spread of anti-slip granules across the surface coating. Refills are available and can be swapped as required.

7ins Roller Set

This larger size textured roller to the standard 4” roller is ideal for applying Smartkote products in larger areas.

4ins Roller Frame & Handle

Available as just the frame and then purchase as many refills as required or can purchase the complete set.

7ins Roller Frame & Handle

Available as just the frame, then purchase as many refills as required or you can purchase the complete set.